vs-130-160mt..kpbf series www.vishay.com vishay semiconductors revision: 10-jun-14 1 document number: 94354 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 three phase bridge, 130 a to 160 a (power modules) features ? package fully compatible with the industry standard int-a-pak power modules series ? high thermal conductivity package, electrically insulated case ? excellent power volume ratio ? 4000 v rms isolating voltage ? ul e78996 approved ? designed and qualified for industrial level ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 description a range of extremely compact, encapsulated three phase bridge rectifiers offering effi cient and reliable operation. ? they are intended for use in general purpose and heavy duty applications. electrical specifications product summary i o 130 a to 160 a v rrm 800 v to 1600 v package mt-k circuit three phase bridge mtk major ratings and characteristics symbol characteristics values 130mt.k values 160mt.k units i o 130 (160) 160 (200) a t c 85 (62) 85 (60) c i fsm 50 hz 1130 1430 a 60 hz 1180 1500 i 2 t 50 hz 6400 10 200 a 2 s 60 hz 5800 9300 i 2 ? t 64 000 102 000 a 2 ? s v rrm range 800 to 1600 v t stg range -40 to 150 c t j voltage ratings type number voltage code v rrm , maximum repetitive peak reverse voltage v v rsm , maximum non-repetitive peak reverse voltage v i rrm maximum at t j = maximum ma vs-130-160mt..k 80 800 900 10 100 1000 1100 120 1200 1300 140 1400 1500 160 1600 1700
vs-130-160mt..kpbf series www.vishay.com vishay semiconductors revision: 10-jun-14 2 document number: 94354 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 forward conduction parameter symbol test conditions values 130mt.k values 160mt.k units maximum dc output current ? at case temperature i o 120 rect. conduction angle 130 (160) 160 (200) a 85 (62) 85 (60) c maximum peak, one-cycle ? forward, non-re petitive surge current i tsm t = 10 ms no voltage ? reapplied initial ? t j = t j maximum 1130 1430 a t = 8.3 ms 1180 1500 t = 10 ms 100 % v rrm reapplied 950 1200 t = 8.3 ms 1000 1260 maximum i 2 t for fusing i 2 t t = 10 ms no voltage ? reapplied 64 000 102 000 a 2 s t = 8.3 ms 5800 9300 t = 10 ms 100 % v rrm reapplied 4500 7200 t = 8.3 ms 4100 6600 maximum i 2 ? t for fusing i 2 ? t t = 0.1 ms to 10 ms, no vo ltage reapplied 64 000 102 000 a 2 ? s low level value of ? threshold voltage v t(to)1 (16.7 % x ? x i t(av) < i < ? x i t(av) ), ? t j maximum 0.78 0.81 v high level value of ? threshold voltage v t(to)2 (i > ? x i t(av) ), t j maximum 0.99 1.04 low level value of forward slope resistance r f1 16.7 % x ? x i t(av) < i < ? x i t(av) ), ? t j maximum 4.59 3.52 m ? high level of forward slope ? resistance r f2 (i > ? x i t(av) ), t j maximum 4.17 3.13 maximum forward ? voltage drop v fm i pk = 200 a, t j = 25 c, t p = 400 s single junction 1.63 1.49 v rms isolation voltage v isol t j = 25 c, all terminal shorted ? f = 50 hz, t = 1 s 4000 thermal and mechanical specifications parameter symbol test conditions values 130mt.k values 160mt.k units maximum junction operating and storage temperature range t j , t stg -40 to 150 c maximum thermal resistance, ? junction to case r thjc dc operation per module 0.16 0.12 k/w dc operation per junction 0.93 0.73 120 rect. condunction an gle per module 0.18 0.15 120 rect. condunction angle per junction 1.08 0.88 maximum thermal resistance, ? case to heatsink r thcs per module ? mounting surface smooth, flat and greased 0.03 mounting ? torque 10 % to heatsink a mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound. ? lubricated threads. 4 to 6 nm to terminal 3 to 4 approximate weight 176 g
vs-130-160mt..kpbf series www.vishay.com vishay semiconductors revision: 10-jun-14 3 document number: 94354 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 1 - current rating characteristics fig. 2 - forward voltage drop characteristics fig. 3 - total power loss characteristics fig. 4 - maximum non-repetitive surge current fig. 5 - maximu m non-repetitive surge current 130 120 150 140 110 100 90 80 70 60 50 maximum allowable case temperature (c) total output current (a) 20 40 60 80 120 100 180 160 140 0 130mt..k series 120 (rect) + - ~ 1 100 10 1000 instantaneous forward current (a) instantaneous forward voltage (v) 1.0 2.0 3.0 4.0 5.0 0 t j = 25 c 130mt..k series per junction t j = 150 c 0 500 450 400 350 300 250 200 150 100 50 maximum total power loss (w) total output current (a) 20 40 60 80 100 160 140 120 0 120 (rect) 130mt..k series t j = 150 c 0 100 150 200 250 300 350 400 450 500 50 maximum total power loss (w) maximum allowable ambient temperature (c) 25 50 75 100 125 150 0 r thsa = 0.05 k/w - r 0.12 k/w 0.2 k/w 0.3 k/w 0.5 k/w 0.7 k/w 1.5 k/w 700 800 900 600 500 400 300 200 1000 peak half sine wave forward current (a) number of equal amplitude half cycle current pulses (n) 10 100 1 initial t j = 150c at 60 hz 0.0083 s at 50 hz 0.0100 s at any rated load condition and with rated v rrm applied following surge. 130mt..k series 900 800 700 600 500 400 300 200 1200 1100 1000 pulse train duration (s) 0.1 1.0 0.01 peak half sine wave forward current (a) maximum non-repetitive surge current 130mt..k series initial t j = 150 c no voltage reapplied rated v rrm reapplied versus pulse train duration.
vs-130-160mt..kpbf series www.vishay.com vishay semiconductors revision: 10-jun-14 4 document number: 94354 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 6 - current ratings characteristic fig. 7 - forward voltage drop characteristics fig. 8 - total power loss characteristics fig. 9 - maximum non-repetitive surge current fig. 10 - maximu m non-repetitive surge current 150 140 130 110 100 120 50 60 70 80 90 total output current (a) 80 120 200 40 160 240 0 maximum allowable case temperature (c) 120 (rect) 160mt..k series + - ~ 1 100 10 1000 instantaneous forward current (a) instantaneous forward voltage (v) 1234 5 0 t j = 25 c 160mt..k series per junction t j = 150 c 0 500 600 400 300 200 100 maximum total power loss (w) total output current (a) 40 80 120 160 200 0 120 (rect) 160mt..k series t j = 150 c 0 500 600 400 300 200 100 maximum total power loss (w) maximum allowable ambient temperature (c) 25 50 75 100 125 150 0 r thsa = 0.05 k/w - r 0.1 k/w 0.15 k/w 0.2 k/w 0.3 k/w 0.5 k/w 0.7 k/w 1.5 k/w 900 800 700 600 500 400 300 1300 1200 1100 1000 peak half sine wave forward current (a) number of equal amplitude half cycle current pulses (n) 10 100 1 160mt..k series initial t j = 150 c at 60 hz 0.0083 s at 50 hz 0.0100 s at any rated load condition and with rated v rrm applied following surge. 900 800 700 600 500 400 300 1500 1400 1300 1200 1100 1000 peak half sine wave forward current (a) pulse train duration (s) 0.1 1.0 0.01 initial t j = 150 c no voltage reapplied rated v rrm reapplied versus pulse train duration. maximum non-repetitive surge current 160mt..k series
vs-130-160mt..kpbf series www.vishay.com vishay semiconductors revision: 10-jun-14 5 document number: 94354 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 11 - thermal impedance z thjc characteristics ordering information table note ? to order the optional hardware go to: www.vishay.com/doc?95172 circuit configuration links to related documents dimensions www.vishay.com/doc?95004 0.01 0.1 1 10 0.001 0.01 0.1 1 square wave pulse duration (s) z thjc - transient thermal impedance (k/w) 10 per junction 130mt..k series 160mt..k series steady state value r thjc = 0.93 k/w r thjc = 0.73 k/w (dc operation) 2 - current rating code: 13 = 130 a (average) 3 - three phase diodes bridge 1 - vishay semiconductors product 4 - essential part number 5 - voltage code x 10 = v rrm (see voltage ratings table) 6 - pbf = lead (pb)-free 16 = 160 a (average) device code 6 2 1 4 3 16 vs- 0 mt 160 k pbf 5 a b c d e f + - ~
document number: 95004 for tec hnical questions, contact: indmodules@vishay.com www.vishay.com revision: 27-aug-07 1 mtk (with and without optional barrier) outline dimensions vishay semiconductors dimensions with optional barriers in millimeters (inches) 24 0.5 (0.94 0.02) 38 0.5 (1.5 0.02) 30 0.5 (1.17 0.02) 35 0.3 (1.38 0.01) 8.5 0.5 (0.34 0.02) fast-on tab 2.8 x 0.8 (type 110) screws m5 x 0.8 length 10 28 1 (1.11 0.04) 25.5 0.5 (1.004 0.02) 5 0.3 (0.2 0.01) 75 0.5 (2.95 0.02) 46 0.3 (1.81 0.01) 80 0.3 (3.15 0.01) 94 0.3 (3.7 0.01) ? 6.5 0.2 (? 0.26 0.01) 14 0.3 (0.55 0.01) 18 0.3 (0.71 0.01) 1 2 3 4 5 6 7 8 a b c f e d
www.vishay.com for technical questions, contact: indmodules@vishay.com document number: 95004 2 revision: 27-aug-07 outline dimensions vishay semiconductors mtk (with and withou t optional barrier) dimensions without optional barriers in millimeters (inches) 24 0.5 (0.94 0.02) 30 0.5 (1.17 0.02) 35 0.3 (1.38 0.01) 8.5 0.5 (0.34 0.02) fast-on tab 2.8 x 0.8 (type 110) screws m5 x 0.8 length 10 28 1 (1.11 0.04) 25.5 0.5 (1.004 0.02) 5 0.3 (0.2 0.01) 75 0.5 (2.95 0.02) 46 0.3 (1.81 0.01) 80 0.3 (3.15 0.01) 94 0.3 (3.7 0.01) ? 6.5 0.2 (? 0.26 0.01) 14 0.3 (0.55 0.01) 18 0.3 (0.71 0.01) 1 2 3 4 5 6 7 8 a b c f e d
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
